一种基于LMS的时域相干累积算法研究

为了克服低信噪比条件下传统的自适应滤波算法抑制高斯噪声效果差的缺点,提出了基于最小均方(LMS)的时域相干累积新算法。计算机仿真结果表明,该算法具有良好的抑制高斯噪声的性能,对于低信噪比下信号的增强效果明显优于传统的自适应滤波算法。     

谈自给式呼吸器的选用

论述了自给式呼吸器在灾害事故抢险救援中的重要性,分析了三种自给式呼吸器的使用特点和使用注意事项,介绍了三种常用的自给式呼吸器防护时间的确定方法,以及在实际救援作业中合理选用呼吸器应考虑的事项。     

机电系统故障—时间应力的关联分析技术研究

时间应力测量装置技术是一种测量和存储各种应力数据以及对这些数据进行挖掘与分析的技术。简要介绍了时间应力的基本概念及其研究应用的发展历程。在此基础上,提出了基于故障模式、影响及应力分析(FMESA)的时间应力与机电系统故障的定性关联分析方法和基于多元logistic回归的定量关联分析方法。最后,以某型航空地平仪为对象进行了案例研究。案例分析结果表明,文中提出的时间应力与机电系统故障的关联分析方法能分析出影响系统性能的关键应力因素,为机电系统的故障诊断及故障预测提供基础。     

非自伴情形下时滞抛物方程的惯性流形

利用Lyapunov-Perron方法在适当的谱间隙条件和适当小的时滞假设下,证明了一类非自伴算子情形下半线性时滞抛物方程惯性流形的存在性。     

A stochastic model for burn‐in procedures in accelerated environment

Burn‐in procedure is a manufacturing technique that is intended to eliminate early failures of system or product. Burning‐in a component or system means to subject it to a period of use prior to being used in field. Generally, burn‐in is considered expensive and so the length of burn‐in is typically limited. Thus, burn‐in is most often accomplished in an accelerated environment in order to shorten the burn‐in process. A new failure rate model for an accelerated burn‐in procedure, which incorporates the accelerated ageing process induced by the accelerated environmental stress, is proposed. Under a more general assumption on the shape of failure rate function of products, which includes the traditional bathtub‐shaped failure rate function as a special case, upper bounds for optimal burn‐in time will be derived. A numerical example will also be given for illustration. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

Transient analysis of Markov models of fault‐tolerant systems with deferred repair using split regenerative randomization

The (standard) randomization method is an attractive alternative for the transient analysis of continuous time Markov models. The main advantages of the method are numerical stability, well‐controlled computation error, and ability to specify the computation error in advance. However, the fact that the method can be computationally very expensive limits its applicability. In this paper, we develop a new method called split regenerative randomization, which, having the same good properties as standard randomization, can be significantly more efficient. The method covers reliability‐like models with a particular but quite general structure and requires the selection of a subset of states and a regenerative state satisfying some conditions. For a class of continuous time Markov models, model class C₂, including typical failure/repair reliability‐like models with exponential failure and repair time distributions and deferred repair, natural selections are available for both the subset of states and the regenerative state and, for those natural selections, theoretical results are available assessing the efficiency of the method in terms of “visible” model characteristics. Those results can be used to anticipate when the method can be expected to be competitive. We illustrate the application of the method using a large class C₂ model and show that for models in that class the method can indeed be significantly more efficient than previously available randomization‐based methods. © 2006 Wiley Periodicals, Inc. Naval Research Logistics, 2006     

基于时域平均的齿轮故障诊断

提出了信号时域平均处理的新算法,解决了周期截断误差对平均结果的影响,并对测取的齿轮箱齿轮故障振动信号进行了处理。实验结果表明:该方法在齿轮故障信号的处理中能够消除背景噪声的影响,取得比较理想的效果。     

XNAV中的相对论效应(III)——时空测量值的坐标转换

在文献[1-3]中求得的XNAV基本方程中,时间和距离是指太阳质心系(BCRS)中的坐标量。但在实际测量中,接收机测量的时间是时钟的固有时,接收机的位置一般应以地心系(GCRS)为基准。在相对论框架内完成这两个坐标转换,使得XNAV测量方程能够直接得到应用。最后给出了完整的XNAV高精度测量方程及其在实际测量中的计算过程。     

链约束下加工时间恶化的Flow Shop排序问题

讨论作业具有线性加工时间,作业间具有链约束的两台处理机流水作业排序问题,目标函数为极小化完工时间。在作业加工时间简单线性恶化下,提出作业的非负开始和停止延迟恶化率,构造了满足约束条件的复合作业。在此基础上,给出作业间具有平行链约束的两台处理机流水作业排序问题的最优多项式算法。     

时敏打击指挥控制技术初探

分析了时敏目标打击链,介绍了压缩打击链的主要途径,描述了图像处理、战场数据管理、武器动态分配、智能代理集成等有关时敏打击指挥控制技术,为时敏打击指挥控制系统的研究提供参考。